The thermal imaging camera lens size 50mm. It has just one infrared thermal imaging camera. There are 3 color palettes to choose from, white, iron red, pseudo color. it is a pinpoint-precision professional 3-axis gimbal that features high stability, small size, lightweight, and low power consumption. it supports PWM control, S.BUS control, and serial command control, suitable for close-range remote control or remote data command control.
High stabilized 3 Axis gimbal thermal imaging camera. The thermal camera is with 640*480 resolution,25HZ, 50mm lens, which allows you to detect targets in the night or low visibility conditions, and provides you with priceless information. A high-performance 3-axis gimbal is developed based on FOC(field-oriented control) technology, which will give you crystal clear video footage.
The feature for the 50mm drone gimbal thermal imaging camera:
The thermal camera comes with a 50mm lens, which will enable you to get a very clear thermal image even you are 500 meters away from the target.
It is using the most advanced thermal tracking technology, with which you will be able to track the target very easily.
Another big feature is that the gimbal will geotag the video streaming and photos, also gimbal Yaw/Pitch angle, height, time information will be displayed on camera OSD, this is really important when you are conducting missions like rescue and search.
Ethernet and HDMI output
It offers both Ethernet and HDMI output options, so you are free to choose IP or HDMI video downlink upon your application.
Easy for system integration
with an amazing advantage that the gimbal can not only be controlled via PWM signal, but also serial command. Also gimbal status(like Yaw/Pitch/Roll angle, zoom position, etc) can be obtained by sending serial command to the gimbal via its serial port, which is really useful for precise gimbal control and system integration.
Clean and simple wiring, flexible gimbal control
It provides an outstanding wiring hub design for RC receiver and video output port, which makes wiring pretty easily. Also, the gimbal offers 2 smart speed modes: FAST speed and LOW speed. Fast speed mode is used for a small zooming range, which makes the gimbal control sensitive and quick. LOW-speed mode is used for a large zoom range, will enable you to target the object more accurately.
|Working voltage||12V ~ 16V|
|Input voltage||3S ~ 4S|
|Dynamic current||500mA @ 12V|
|Idle current||400mA @ 12V|
|Power consumption||≤ 3.85W|
|Working environment temp.||-20℃ ~ +80℃|
|Output||micro HDMI(HD output 1080P 60fps) / IP / SDI|
|Local-storage||SD card (Up to 128G, class 10, FAT32 or ex FAT format)|
|Control method||PWM / TTL / S.BUS|
|Yaw/Pan||±170°/ ±360°*N (IP/SDI output)|
|Vibration angle||Pitch/Roll: ±0.01°, Yaw：±0.01°|
|One-key to center||√|
|Thermal Imager Spec|
|Detective Distance (Man: 1.8×0.5m)||1471 meters|
|Recognize Distance (Man: 1.8×0.5m)||368 meters|
|Verified Distance (Man: 1.8×0.5m)||184 meters|
|Detective Distance (Car: 4.2×1.8m)||4510 meters|
|Recognize Distance (Car: 4.2×1.8m)||1127 meters|
|Verified Distance (Car: 4.2×1.8m)||564 meters|
|Working mode||Uncooled long wave (8μm~14μm) thermal imager|
|Focusing method||Athermal prime lens|
|MRTD||≤650mK (@characteristic frequency)|
|Image enhancement||Auto adjust image brightness and contrast ratio|
|Color palette||White, iron red, pseudo color|
|Auto Non-uniform correction||Yes (no shutter)|
|Digital zoom||2x, 4x|
|Sync correct time||Yes|
|Thermal Object Tracking|
|Update rate of deviation pixel||25Hz|
|Output delay of deviation pixel||<3ms|
|Minimum object size||16*16 pixel|
|Maximum object size||128*128 pixel|
|Tracking speed||±32 pixel/frame|
|Object memory time||100 frames (4s)|